Home

Lamebo is the main Italian producer of splitting band knives.

The splitting band knives are produced for use in different sectors of the leather industry: tanneries, shoe and leather manufacturing, and in other sectors involving cutting: cork factories, foam materials, leather, skins, cork, textiles, rubber, fur, paper, velvet, non-woven fabric
Above all, Lamebo knives are used in:

  • Tanneries: on splitting machines by Mosconi, Poletto, Rizzi, Turner, Svit, Linta, Alpespak, CSM, Gemata, Mercier and other machines.
  • Shoe manufacturers and Leathergoods :on leather splitting machines by Alberti, Atom-Ellegi, Camoga, Fortuna, Omsa-Sagitta, Albeko, Svit, and other machines.
  • Processing of foam, synthetics and cork factories: on machines by Fecken Kirfel and other machines.
  • Fur processing factory: for processing skins on machines by Capdevila, Selbeck, and local machines.

More informations about splitting band knifes on Wikipedia.




In evidence

thumb-1

Lamebo Season's Greetings

23.12.2017-07.01.2018

Lamebo staff wishes everybody a Happy Season's Holiday!

Read more
thumb-1

thumb-1

Tratto/From International Technology..

28/08/2017

Lamebo - The blade that makes the difference - Cutting costs while improving the quality /
Lamebo - La lama che fa la differenza - abbattere i costi migliorando la qualità

thumb-1

Tratto/From l'Informatore Vigevanese - 06/07/2017

19/07/2017

Un articolo dal titolo "Nel suo complesso, la filiera cresce" su L'informatore vigevanese, relativo all'Assemblea annuale Assomac svoltasi a Vigevano venerdì 30/06.

thumb-1

Tratto/From Il Sole 24 Ore...

30/06/2017

Assemblea Generale Assomac, giugno 2017, Vigevano, presso la sede di Assomac.

Stand Lamebo al Simac Tanning Tech 2017

25/05/2017

Ecco un piccolo video che mostra il nostro stand durante la fiera Fiera Simac Tanning Tech che si è svolta a Milano dal 21 al 23 febbraio 2017

thumb-1

thumb-1

Tratto da / From ILM...

06/04/2017

Interview with Assomac President, Gabriella Marchioni Bocca, following the Simac Tanning Tech exhibition.

ASSOMAC - SIMAC TANNING TECH 2017

05/04/2017

Dal canale Youtube di Assomac Servizi/From the Assomac channel on Youtube:

thumb-1

Da International Technology/From International Technology

30/03/2017

2016 positivo per la tecnologia italiana - L'export guida la crescita del settore

A positive 2016 for Italian technology - The sector growth is driven by exports

thumb-1

Tratto da La Conceria - Il Settimanale della pelle n. 8 - 2017/ from La Conceria

28/03/2017

Boom Tecnologico - Simac Tanning Tech

thumb-1

Tratto da IT Simac TT 2017...

15/03/2017

Industria 4.0 / Industry 4.0 " The Leather-Footwear System must work as one" ...

thumb-1

APLF 2017 - Hong Kong

03/03/2017

APLF 2017 in Hong Kong - 29-31 March 2017

Read more
thumb-1

Tratto da/From Leatherbiz.com..

02/03/2017

Tanning Tech opens
Assomac president,Gabriella Marchioni Bocca, formally opened the 2017 edition of Simac Tanning Tech in Milan on 21st of February.

thumb-1

Simac Tanning Tech 2017

01.03.2017

Lamebo thanks everybody for all kind visits received during the fair! We will wait for you in Hong Kong!!

thumb-1

Simac Tanning Tech 2017

21st-23rd February 2017

Attending the Exhibition...

Read more
thumb-1

Attestato di benemerenza

16/02/2017

Riceviamo l'attestato di benemerenza per aver contribuito attraverso una libera donazione a sostenere ed affrontare le difficoltà ed i disagi degli eventi sismici dell'anno 2016 verificatosi a Sarnano (MC).
We received the merit certificate since we had helped thru' charitable contribution to support and face difficulties, disadvantages related to the earthquakes in year 2016 in Sarnano (MC).

thumb-1

Tratto da/ from..

25/01/2017

Una grande iniziativa promossa dai Sig.Giancarlo Dani e Sig.Rino Mastrotto in cui c'è anche un po' di "cuore" della Lamebo. / A great initiative promoted by Mr.Giancarlo Dani and Mr.Rino Mastrotto where Lamebo's "heart" is present. /Una gran iniciativa promovida por el Sr Giancarlo Dani y el Sr Rino Mastrotto donde hay un poco de "corazon" de Lamebo.

thumb-1

Tratto da IT Magazine / From IT Magazine...

11/01/2017

Simac Tanning Tech 2017: cresce del 20% l'area espositiva - Un ruolo centrale per il settore / Exhibition area up 20% - A central Role for the Sector

thumb-1

Tratto da IT Journal / From IT Journal....

11/01/2017

Assomac: un punto di riferimento per l'industria di settore italiana e internazionale / Assomac - A point of the reference for the Italian and international industry.

thumb-1

From/Tratto da La Conceria

20/12/2016

Timori "macro" per certezze "micro" / "macro" worries for "micro" certainties
Interview to Mrs. Gabriella Bocca, Lamebo, Assomac President.

thumb-1

From / Tratto da La Conceria ....

07/12/2016

Fattore + 20% al Simac / Tanning Tech 2017, a tre mesi dalla fiera spazio espositivo in forte aumento /
Three months left to the Simac / Tanning Tech 2017 and there is +20% exhibition area already booked!

thumb-1

In Backstage Assomac...

25/11/2016

Assomac citata dal ministro Calenda come esempio virtuoso nella cooperatione tra Italia e Vietnam / The Minister Calenda (MISE) mentioned Assomac Assiociation as virtuoso model in the business cooperation between Italy and Vietnam.
Thanks ASSOMAC!

thumb-1

Tratto da L'Informatore../ From L'Informatore..

17/11/2016

Investitura ufficiale del Consorzio Santi Crispino e Crispiniano per Gabriella Bocca, Lamebo srl.
/ Official investiture for Mrs.Gabriella Bocca, Lamebo by Consorzio Santi Crispino e Crispiniano.

thumb-1

Tratto da International Technology Journal/From International Technology Journal.....

12/09/2016

"Assomac premia la longevità delle aziende"/"Assomac awards enterprises longevity"

thumb-1

Tratto da International Technology...Uniti si vince!/United to win!

01/09/2016

L'Assemblea Annuale di Assomac ha riunito gli attori della filiera moda pelle e calzature / The leather and footwear fashion chain Actors brought together by the Annual Meeting of Assomac.

thumb-1

Tratto da Arsutoria / From Arsutoria...

04/08/2016

"Le lame che fanno la differenza", il nuovo articolo sulle lame Lamebo pubblicato su Arsutoria.

"Blades that make a difference" the new article about Lamebo splitting band knives published on Arsutoria.

thumb-1

Legality Rating

09.03.2016

On the 9.03.2016 Lamebo Srl has received the "Legality Rating"

Read more
thumb-1

a nice story..

30/11/2015

a nice story..

Read more
thumb-1

Firma MOU_missione di sistema MISE-Confindustria Teheran

29.11.2015

IRAN: La voglia di rimettersi in gioco
by M. Pucci - ASSOMAC

Read more
thumb-1

President of Assomac

26.06.2015

Mrs. Gabriella Marchioni Bocca is the new President of Assomac

thumb-1

D. Lgs 231/01 and Ethic Code

01/01/2015

Starting from the 1st January 2015, Lamebo introduces the "Form of Organisation, Management and Control with reference to legislative decree 231/01 and Ethic Code".

Read more

Company Name

Click on the picture to see the photo gallery
Rita Bocca during a Technological Symposium in Egypt (1984)

In 1969, Enrico and Rita Bocca realized that, by drawing on their many years of experience, they could fill the gap for a specialized company able to meet the growing and ever more sophisticated needs of customers using splitting band knives. So, in 1969 in San Mauro Torinese, Lamebo srl was born – “the Italian alternative to splitting band knives manufactured abroad”.

Having become the most important manufacturers of splitting band knives in Italy, Lamebo started to scale the international markets: a new phase then began under the guidance of Gabriella Marchioni Bocca.

Now, after celebrating its 45th anniversary, Lamebo srl has become the undisputed global Leader of quality splitting knives in the tannery, shoe manufacturing, leather and fur industries, as well as in the processing of foam, synthetics, rubber and cork.

LAMEBO’s experience, and technical and business know-how means it is a highly reliable and qualified partner, able to address the needs and problems of its vast customer base.

Today, Lamebo can lay claim to a worldwide sales network. We have over 1700 customers scattered across 90 countries all over the world.

To keep in close touch with its customers and get a better understanding of their individual needs, Lamebo participates in international trade fairs, technological seminars, meetings with local representatives, and offers tailor-made consultancy based on its customers’ requirements.

If you can’t find the answers to your specific questions, then contact us and we will be more than happy to find a solution to your problem.

Today, the name Lamebo stands for a truly global leader in the splitting band knives sector.

Why Lamebo

Origin and quality of our steels

The steels that we use for ALL our types of blades, Lamebo Platinum, Extra and Silver, are from European Origin only. (from Germany and Sweden)

Made in Italy

Our blades are 100% Made in Italy in our factory located in Leinì, Torino.

We offer you maximum guarantee and transparency.

Our quality is ISO 9001:2008 certified, you can find the Quality Certificate on our website www.lamebo.it!

Perfect welding and prebevelling

but not only...

Rectification on both edges and surfaces

Why did we decide to rectify our blades, even if this involves more steps in our production process? Here under all advantages that you could have.

What's rectification?

Rectification of the surfaces: when we speak about this rectification, we mean a “treatment of levelling” that we do in order to guaratee the same thickness on all circumference along the lenght of the blade and smooth surfaces, with a very low level of roughness.

Rectification of the edges: when we speak about this rectification, we mean a treatment of turning that we do on the edges of the blade in order to eliminate/reduce the oscillation of the running blade.

Why rectification?

The rectification of our blades, that makes the difference between our company and most of our competitors, permits our customers to reach the following results:

Rectification of the surfaces:
  • Stricter and more precise tolerances in the splitting, guarantee the maximum precision in the cutting and less waste of material
  • The material passes quicker and easier, increasing of productivity of the number of splitted pieces, at the same condition of number of blades used
  • Quicker blade change
Rectification of the edges
  • In machines with automatic feed sharpening, the rectification of the back edge and consequentely the precision on the linearity, permits the blade to run perfectly, reducing the use of the grinding stones (if the blade runs not straight, the photocell notices the movement and “calls” the blade to the grinding stones more frequentely) and if the life of the blade increases, it means that there are less blade changes and less blades consumption
  • Stricter and more precise tolerances in the splitting, guarantee the maximum precision in the cutting and less waste of material

Check and warranty 100%

all our blades are 100% controlled and 100% guaranteed

Products – Sectors

Click on the picture to see the photo gallery
Steel rolls for tannery

Lamebo produces all kinds of splitting band knives, of any size that can be used in any sector and on any splitting machines, based on your requirements for length (from 1000 to over 15000 mm), width (from 10 to 120 mm) and thickness (from 0.40 to 1.50 mm).

We can offer you a wide range of the best raw materials in Europe, specifically designed to fulfill the requirements of any kind of application, to split any kind of material (leather, fur, paper, rubber, India rubber, cork, velvet and textiles in general, foams, non-woven material) in any state (dry, wetblue, lime, in different harnesses)and in relation to the grinding wheels utilized.

The knives are ground on both surfaces to guarantee a uniform thickness, machined on the edges to guarantee maximum straightness when used and pre-beveled to reduce the time taken to start operation once they are mounted on the splitting machine.

We have a full stock of all the combinations of thicknesses and widths of raw materials which means we are able to create any kind of splitting bandknife.

Lamebo works in conjunction with the main worldwide manufacturers of splitting machines to fine tune the combination of splitting machine and knife during the design and production phase.

Lamebo knives can be mounted on any splitting machine, leather splitter or cutter. (Alpespak, Mosconi, CSM, Mercier, Gemata-Linta,Rizzi,Poletto, Turner, Kela, Svit, Alberti, Atom-Ellegi, Camoga, Fortuna, Omsa-Sagitta, Albeko, Bangda, Dashun, Nippy, Fecken Kirfel, Baumer, Capdevila, Gemata, Selbeck, Perini, etc.)

Need a splitting bandknife, but can't find one? Let us custom-make it for you.

Splitting band knives for rubber, foam and cork

We can produce band knives measuring from 1000 a 15000 mm.

Lamebo can offer you the best band knives for splitting, profile cutting, peeling and finishing of rubber, India rubber, latex, cork, foam rubber, polyurethane, polyethylene, polypropylene, neoprene and any product or derivative of the above which can be processed by band knives mounted on any machine on the market.

The most common combinations of width and thickness used are:

100 x 1.32 mm.

85 x 1.20 mm.

50 x 0.80 mm.

40 x 0.50 mm.

 

100 x 1.25 mm.

80 x 1.00 mm.

80 x 0.60 mm.

15 x 0.50 mm.

 

100 x 1.23 mm.

60 x 1.00 mm.

60 x 0.60 mm.

13 x 0.50 mm.

 

100 x 1.20 mm.

50 x 1.00 mm.

50 x 0.60 mm.

12 x 0.50 mm.

 

50 x 1.20 mm.

60 x 0.80 mm.

30 x 0.60 mm.

10 x 0.50 mm.

 

 

We have a large variety of raw steel in our warehouses which means Lamebo can create any combination of width and length:

Thickness: from 0.40 mm. to 1.32 mm.

Width: from 10 mm. to 115 mm.

The knives can have one, two or four bevels and four intersecting bevels.

The Knives can be simply welded and beveled, or finished with the following tolerances:

The hardness, expressed in Rockwell degrees, of the different raw materials can be changed, on request, from 44 to 50 HRC or in the range of 48 - 51 HRC.

 

For knives from 6000 mm. to 15000 mm.

Production tolerances:

Lamebo Extra ®

Length: mm. ± 20

Width: mm. +0 / -1

Thickness: mm. +0.005 / -0.015

Linearity (oscillation of moving knife): mm. ± 0.025

For knives from 2000 mm. to 5000 mm.

 

Production tolerances:

Lamebo Extra ®

Length: mm. ± 5

Width: mm. +0 / -1

Thickness: mm. +0 / -0.015

Linearity (oscillation of moving knife): mm. ± 0.025

 

We can design a new band knife based on your requirements for special, non-standard applications.

Need a splitting band knife, but can’t find one? Let us custom-make it for you.

Splitting band knives for Tanneries, leather production and textile processing

We can offer you a wide range of the best raw materials in Europe, specifically designed to fulfill the requirements of any kind of application; this combined with our experience, research and feedback means we can offer you the steel best suited to your use in consideration of:

  • the interaction that occurs between the chemical-physical composition of the steel of the knife and the products used in the tanning or leather production;

  • the state of the leather being produced (lime, wet blue, dry, white crust, etc.);

  • the type of processing to be done;

  • the wheel used in grinding

The most common combinations of width and thickness used on splitting machines for tanneries and fur factories are:

115 x 1.20 mm.

90 x 1.20 mm

85 x 1.00 mm..

 

110 x 1.20 mm.

85 x 1.20 mm.

85 x 0.90 mm

 

100 x 1.20 mm.

90 x 1.10 mm.

85 x 0.80 mm.

 

95 x 1.20 mm.

90 x 1.00 mm.

70 x 0.80 mm.

 

 

We have a large variety of raw steel in our warehouses which means Lamebo can create any combination of width and length:

Thickness: from 0.80 mm. to 1.20 mm.

Width: from 70 mm. to 115 mm.

The hardness, expressed in Rockwell degrees, of the different raw materials can be changed, on request, from 44 to 50 HRC.

Production tolerances:

 

Lamebo Extra ®

Length: mm. ± 20

Width : mm. +0 / -1

Thickness: mm. +0.005 / -0.015

Linearity (oscillation of moving knife): mm. ± 0.025

 

Lamebo Platinum ®

Length: mm. ± 10

Width: mm. +0 / -1

Thickness: mm. +0 / -0.01

Linearity (oscillation of moving knife) mm. ± 0.02

 

We can design a new band knife based on your requirements for special, non-standard applications.

Need a splitting band knife, but can’t find one? Let us custom-make it for you.

Splitting band knives for the shoe and leather industry

We can produce band knives measuring from 2000 to 6000 mm.

We can offer you a wide range of the best raw materials in Europe, specifically designed to fulfill the requirements of any kind of application; this combined with our experience, research based on feedback received means we can offer you the steel best suited to your use in consideration of:

  • the interaction that occurs between the chemical-physical composition of the steel of the knife and the products used in the tanning or leather production;

  • the type of processing to be done;

  • the wheel used in grinding

The most common combinations of width and thickness used on splitting machines for the shoe and leather industry:

40 x 0.40 mm.

50 x 0.60 mm.

50 x 0.90 mm.

 

40 x 0.50 mm.

50 x 0.70 mm.

50 x 1.00 mm

 

40 x 0.60 mm.

50 x 0.80 mm.

60 x 0.80 mm

 

 

We have a large variety of raw steel in our warehouses which means Lamebo can create any combination of width and length:

Thickness: from 0.40 mm. to 1.00 mm.

Width: from 40 mm. to 60 mm.

The hardness, expressed in Rockwell degrees, of the different raw materials falls in the range of 48 - 51 HRC.

 

Production tolerances:

Lamebo Extra ®

Length: mm. ± 5

Width: mm. +0 / -1

Thickness: mm. +0 / -0.015

Linearity (oscillation of moving knife): mm. ± 0.025

 

Lamebo Platinum ®

Length: mm. ± 2.5

Width: mm. +0 / -1

Thickness: mm. +0 / -0.01

Linearity (oscillation of moving knife): mm. ± 0.015

 

We can design a new band knife based on your requirements for special, non-standard applications.

Need a splitting band knife, but can’t find one? Let us custom-make it for you.

Splitting band knives for paper processing

We can produce splitting band knives measuring from 1000 to 15000 mm.

Lamebo knives can be used to process paper, cardboard and derivatives, plus composite materials that use splitting band knives. They can be mounted on any kind of machinery on the market.

The most common combinations of width and thickness used are:

100 x 1.50 mm.

30 x 0.70 mm.

30 x 0.50 mm.

 

100 x 1.20 mm.

40 x 0.60 mm.

20 x 0.50 mm.

 

35 x 0.80 mm.

35 x 0.60 mm.

40 x 0.40 mm.

 

20 x 0.80 mm.

30 x 0.60 mm.

 

 

 

We have a large variety of raw steel in our warehouses which means Lamebo can create any combination of width and length:

 

Thickness: from 0.40 mm. to 1.50 mm.

Width: from 10 mm. to 118 mm.

 

The Knives can be simply welded and beveled, or finished with the following tolerances:

The hardness, expressed in Rockwell degrees, of the different raw materials can be changed, on request, from 44 to 50 HRC or in the range of 48 - 51 HRC.

 

For knives from 6000 mm. to 15000 mm.

Production tolerances:

 

Lamebo Extra ®

Length: mm. ± 20

Width: mm. +0 / -1

Thickness: mm. +0.005 / -0.015

Linearity (oscillation of moving knife): mm. ± 0.025

 

For knives from 2000 mm. to 5000 mm.

 

Production tolerances:

 

Lamebo Extra ®

Length: mm. ± 5

Width: mm. +0 / -1

Thickness: mm. +0 / -0.015

Linearity (oscillation of moving knife): mm. ± 0.025

 

We can design a new band knife based on your requirements for special, non-standard applications.

Need a splitting band knife, but can’t find one? Let us custom-make it for you.

Recommendations for Use

The splitting band knives must be kept in their protective box and removed from the inside one at a time.

  • Band knives must be kept in their crate, protected by nylon, taking out one blade at a time.
  • For what concerns the tannery splitting band knives, it is necessary to remove the 'resin-glass' protection of welding, only at the moment of the installation on the machine. NEVER bend the welding point (marked by our trade-mark). In case of any complaint, you can find our production references, near the trade-mark.
  • Blades must be clean and protective oil must be removed ; furthermore, please do not bump into blades during cleaning and assembling.
  • Blades must be assembled on fly-wheels, perfectly grinded. Guide-blades, rollers, and plates must be in a good condition, otherwise, blade could not revolve straight.
  • On old machines - adjusted manually - blade must be neither too much tight or too much slack.
  • After the assembling, blade must idle some minutes in order to be able to settle down well, on fly-wheels. Afterward, one can make the machine setting.
  • SHARPENING: our band knives are already pre-sharpened to facilitate the technician and to speed up the operation. It is important to make the first bevel very slowly to avoid overheating the steel and changing its structure, with the prejudice of a good output.
  • The good relation between blade and grinding stone will be the guarantee of the best life of blade.
  • Bevel must be always scratched, never shiny.

We usually recommend following the manufacturer's instructions for the angle of inclination of the bevel.

In wet blue: the bevel for this process is 5 mm. above and 3 mm. below.

In lime: the bevel for this process is 6 mm. above and 4 mm. below.

In dry: the bevel for this process is 3.5 mm. above and 2.5 mm. below (but no longer because it will weaken the cut).

The bevel must be rough and not smooth.

The bevel must always be in very centre of the thickness.

How to do if...

The right procedure to follow in order to get a reimbursement in case the packing arrives damaged to you

PACKING FORWARDERS INSURANCE

Our boxes (that can be made of wood+cardboard or cardboard only) exit from our factory in perfect conditions, well done and checked in every parts by our operators, when the forwarders pick the goods up.

It can happens that during the transport the packing is damaged and arrives to destination (customs/your factory - to you or to your broker) damaged.

If the packing is damaged, maybe also the blades could be damaged and in case you cannot use them, you have the right to be reimbursed if the Insurance is included in the transport.

THE ONLY WAY TO GET THE REIMBURSEMENT and consequentely to permit us to produce new blades for you as replacement, IS TO OPEN IMMEDIATELY THE CLAIM WITH OUR OR YOUR FORWARDER - HOW?

Procedure to follow

  • the forwarder arrives to you/your broker with the goods
  • you check the goods first. If the packing is in perfect conditions ok.

If not:

  • DON'T CLEAR/ACCEPT THE GOODS WITHOUT SAYING NOTHING
  • you take the more picture that you can as proof of the damage (both of the packing and the blades if they have clear damages on them)
  • you ask the forwarder to give you the document that you need to fill in writing that the packing arrived damaged and that you accept/you clear the goods "under condition that you will check the goods in your factory" + your signature - without this document no reimbursement will be done and we will not be able to replace the damaged goods.
  • you finally check in your factory the goods and you inform us about the condition of the goods.
  • If the forwarder is our forwarder: you will send us copy of all documents + picture and we will open the claim and ask for the reimbursement.

Services

Quality is a MUST for staying in the market - especially in an increasingly difficult and globalised market.

Lamebo continues to progress and improve and to do so, it must strive towards constant renewal, but above all, it must listen to its customers' requirements and production needs.

Gabriella Bocca, Italian and International sales director, along with the sales team, follows and personally meets with customer and representatives on a regular basis to pass requirements and requests from various markets to the technical production staff who, in turn, work closely with Italian and international manufacturers of band knife splitting machines.

Dynamic, versatile, competitive: these are the company's characteristics and a tangible sign of the presence and credibility of Lamebo on a global level.

  • Programmed order management
  • Prompt delivery within one week
  • Emergency deliveries: within 24 hours
  • Selection of competitive couriers
  • Door to door service
  • Personalised customer and order management

By listening carefully to its customers, Lamebo has been able to diversify its quality and fulfill all their requirements for both quality and budget.

The qualities are:

PLATINUM

EXTRA or GOLD

SILVER

Quality - certification

To guarantee a constant level of quality in its products, Lamebo initially achieved quality certification through an ISO 9001 approach and then, obtained the second step in certification by changing its procedures in accordance with UNI EN ISO 9001:2008 regulations.

Codification in production management” - states Gabriella Bocca -“ means better control of all the processes, especially for products like ours that require maximum precision. Moreover, in an increasingly difficult and globalised market, any company wanting to continue to progress and improve must strive for on-going improvement and constant renewal”.



Starting from the 1st January 2015, Lamebo introduces the "Form of Organisation, Management and Control with reference to legislative decree 231/01 and Ethic Code".

It is the set of rules and procedures organised in order to prevent the acting of violations and crimes which have to be followed by every person in the company. In order to effect the form, an independent monitoring organisation and a Ethic Code are created. The independent monitoring organisation meets with regular frequency in order to jugde if the Ethic Cod is respected.



Legality Rating

On the 9.03.2016 Lamebo Srl has received the "Legality Rating", that acknowledges the ethical business behavior of Italian companies

News and events archive

thumb-1

Lamebo Season's Greetings

23.12.2017-07.01.2018

Lamebo staff wishes everybody a Happy Season's Holiday!

Read more
thumb-1

thumb-1

Summer Closing

04/08/2017-24/08/2017

Ready for Holidays, we will be back on the 24th of August!

Read more
thumb-1

thumb-1

APLF 2017 - Hong Kong

03/03/2017

APLF 2017 in Hong Kong - 29-31 March 2017

Read more
thumb-1

Simac Tanning Tech 2017

01.03.2017

Lamebo thanks everybody for all kind visits received during the fair! We will wait for you in Hong Kong!!

thumb-1

Simac Tanning Tech 2017

21st-23rd February 2017

Attending the Exhibition...

Read more

thumb-1

Holidays

08-09.12.2016

Lamebo will be closed on Thursday 8th and Friday 9th Dec. for National Holiday

Read more
thumb-1

Simac Tanning Tech 2016

13/05/2016

New video of Lamebo's booth at Simac Tanning Tech 2016 exhibition

Read more
thumb-1

Back to School!

04.05.2016 - 05.05.2016

On the 4th and 5th of May we'll be back to school!

Read more
thumb-1

Legality Rating

09.03.2016

On the 9.03.2016 Lamebo Srl has received the "Legality Rating"

Read more
thumb-1

Happy Season's Holiday!

23.12.2015

We will be back on the 7th of January 2016! Best Wishes to everybody!!

Read more
thumb-1

a nice story..

30/11/2015

a nice story..

Read more
thumb-1

Firma MOU_missione di sistema MISE-Confindustria Teheran

29.11.2015

IRAN: La voglia di rimettersi in gioco
by M. Pucci - ASSOMAC

Read more
thumb-1

Stock

11.11.2015

Lamebo reminds all customers to check the stocks before our Christmas closing in order to organize the production and the deliveries in the best possible way. Thanks to everybody for the kind cooperation!

Read more
thumb-1

TRENDS & FUTURE CHALLENGES

08.09.2015

WORLD LEATHER CONGRESS tenuto da WLC International Council of Tanners

Read more
thumb-1

WLC 2015 Main Sponsor

01.09.2015

Lamebo is WLC 2015 Main Sponsor

Read more
thumb-1

Tabriz Leather Fair TLF

29.07 - 01.08.2015

Int'l Leather and Skin Products and Machineries Exhibition

thumb-1

President of Assomac

26.06.2015

Mrs. Gabriella Marchioni Bocca is the new President of Assomac

thumb-1

SHOES & LEATHER - VIETNAM 2015

15-17 July 2015

Lamebo will attend "Shoes and Leather - Vietnam 2015" fair , we'll be in Italian Pavillon

Read more
thumb-1

APLF HONG KONG

30.03.2015-01.04.2015

Lamebo waits for you!!! Pav.1 - Booth 1A-F27/IT

FIMEC FAIR 2015 - BRASIL

17-20 MARCH, 2015

Read more
thumb-1

SIMAC - TANNING TECH 2015

25-27 FEBRUARY 2015

Lamebo will attend Simac-Tanning Tech Fair in the new Expo 2015, Milano
Booth G48 - Pav. 18

Read more
thumb-1

Video

27.01.2015

Video on-line .......

Read more
thumb-1

IILF 2015 CHENNAI

01-03 February 2015

Lamebo will attend IILF Chennai Fair 2015 HALL 1B booth 08-A ASSOMAC Italian Pavillion

Read more
thumb-1

D. Lgs 231/01 and Ethic Code

01/01/2015

Starting from the 1st January 2015, Lamebo introduces the "Form of Organisation, Management and Control with reference to legislative decree 231/01 and Ethic Code".

Read more
thumb-1

Lamebo renews its image on the WEB

1st June 2014

The work to renew the website

thumb-1

LAMEBO celebrates 45 years of activity

30th January 2014

30th January is an important date for Lamebo: it marks its anniversary!!
This year is even more important because it is celebrating 45 years of activity.

Video

Press archive

thumb-1

Tratto/From International Technology..

28/08/2017

Lamebo - The blade that makes the difference - Cutting costs while improving the quality /
Lamebo - La lama che fa la differenza - abbattere i costi migliorando la qualità

thumb-1

Tratto/From l'Informatore Vigevanese - 06/07/2017

19/07/2017

Un articolo dal titolo "Nel suo complesso, la filiera cresce" su L'informatore vigevanese, relativo all'Assemblea annuale Assomac svoltasi a Vigevano venerdì 30/06.

thumb-1

Tratto da/From International Technology- Made in Italy for Vietnam

03/07/2017

Lamebo - The blade that makes the difference - Cutting costs while improving the quality /
Lamebo - La lama che fa la differenza - abbattere i costi migliorando la qualità

thumb-1

Tratto/From Il Sole 24 Ore...

30/06/2017

Assemblea Generale Assomac, giugno 2017, Vigevano, presso la sede di Assomac.

Stand Lamebo al Simac Tanning Tech 2017

25/05/2017

Ecco un piccolo video che mostra il nostro stand durante la fiera Fiera Simac Tanning Tech che si è svolta a Milano dal 21 al 23 febbraio 2017

thumb-1

Tratto da / From ILM...

06/04/2017

Interview with Assomac President, Gabriella Marchioni Bocca, following the Simac Tanning Tech exhibition.

ASSOMAC - SIMAC TANNING TECH 2017

05/04/2017

Dal canale Youtube di Assomac Servizi/From the Assomac channel on Youtube:

thumb-1

Da International Technology/From International Technology

30/03/2017

2016 positivo per la tecnologia italiana - L'export guida la crescita del settore

A positive 2016 for Italian technology - The sector growth is driven by exports

thumb-1

Tratto da La Conceria - Il Settimanale della pelle n. 8 - 2017/ from La Conceria

28/03/2017

Boom Tecnologico - Simac Tanning Tech

thumb-1

Tratto da IT Simac TT 2017...

15/03/2017

Industria 4.0 / Industry 4.0 " The Leather-Footwear System must work as one" ...

thumb-1

Tratto da/From Leatherbiz.com..

02/03/2017

Tanning Tech opens
Assomac president,Gabriella Marchioni Bocca, formally opened the 2017 edition of Simac Tanning Tech in Milan on 21st of February.

thumb-1

Attestato di benemerenza

16/02/2017

Riceviamo l'attestato di benemerenza per aver contribuito attraverso una libera donazione a sostenere ed affrontare le difficoltà ed i disagi degli eventi sismici dell'anno 2016 verificatosi a Sarnano (MC).
We received the merit certificate since we had helped thru' charitable contribution to support and face difficulties, disadvantages related to the earthquakes in year 2016 in Sarnano (MC).

thumb-1

Tratto da/ from..

25/01/2017

Una grande iniziativa promossa dai Sig.Giancarlo Dani e Sig.Rino Mastrotto in cui c'è anche un po' di "cuore" della Lamebo. / A great initiative promoted by Mr.Giancarlo Dani and Mr.Rino Mastrotto where Lamebo's "heart" is present. /Una gran iniciativa promovida por el Sr Giancarlo Dani y el Sr Rino Mastrotto donde hay un poco de "corazon" de Lamebo.

thumb-1

Tratto da IT Magazine / From IT Magazine...

11/01/2017

Simac Tanning Tech 2017: cresce del 20% l'area espositiva - Un ruolo centrale per il settore / Exhibition area up 20% - A central Role for the Sector

thumb-1

Tratto da IT Journal / From IT Journal....

11/01/2017

Assomac: un punto di riferimento per l'industria di settore italiana e internazionale / Assomac - A point of the reference for the Italian and international industry.

thumb-1

From/Tratto da La Conceria

20/12/2016

Timori "macro" per certezze "micro" / "macro" worries for "micro" certainties
Interview to Mrs. Gabriella Bocca, Lamebo, Assomac President.

thumb-1

From / Tratto da La Conceria ....

07/12/2016

Fattore + 20% al Simac / Tanning Tech 2017, a tre mesi dalla fiera spazio espositivo in forte aumento /
Three months left to the Simac / Tanning Tech 2017 and there is +20% exhibition area already booked!

thumb-1

In Backstage Assomac...

25/11/2016

Assomac citata dal ministro Calenda come esempio virtuoso nella cooperatione tra Italia e Vietnam / The Minister Calenda (MISE) mentioned Assomac Assiociation as virtuoso model in the business cooperation between Italy and Vietnam.
Thanks ASSOMAC!

thumb-1

Tratto da L'Informatore../ From L'Informatore..

17/11/2016

Investitura ufficiale del Consorzio Santi Crispino e Crispiniano per Gabriella Bocca, Lamebo srl.
/ Official investiture for Mrs.Gabriella Bocca, Lamebo by Consorzio Santi Crispino e Crispiniano.

thumb-1

Tratto da Informatore

20/10/2016

Gabriella Bocca, Presidente Assomac, sarà premiata per "Fedeltà al Lavoro" durante la Festa del Consorzio Santi Crispino e Crispiniano / Gabriella Bocca, Assomac President, will be awarded for "Fidelity to Work" during the Festival of Santi Crispino and Crispiniano Consortium.

thumb-1

Tratto da International Technology Journal/From International Technology Journal.....

12/09/2016

"Assomac premia la longevità delle aziende"/"Assomac awards enterprises longevity"

thumb-1

Tratto da International Technology...Uniti si vince!/United to win!

01/09/2016

L'Assemblea Annuale di Assomac ha riunito gli attori della filiera moda pelle e calzature / The leather and footwear fashion chain Actors brought together by the Annual Meeting of Assomac.

thumb-1

Tratto da Arsutoria / From Arsutoria...

04/08/2016

"Le lame che fanno la differenza", il nuovo articolo sulle lame Lamebo pubblicato su Arsutoria.

"Blades that make a difference" the new article about Lamebo splitting band knives published on Arsutoria.

thumb-1

Tratto da Mdp La conceria ..

28/07/2016

Tratto da Mdp La conceria..Intervista a Gabriella Marchioni Bocca, presidente Assomac, Assemblea Generale a Desenzano del Garda.

thumb-1

Tratto da International Leather Maker

01/07/2016

Un articolo tratto da International Leather Maker: Italian machinery sector driven by exports

thumb-1

Tratto da International Technology ...

01/07/2016

Tratto da International Technology, un nuovo articolo sulle lame a spaccare Lamebo, "Un brand italiano sinonimo di alta tecnologia"

thumb-1

Tratto da Il Sole 24 Ore....

27/06/2016

Tratto da Il Sole 24 Ore....Assemblea Generale Assomac, giugno 2016 Desenzano Del Garda.

thumb-1

From Leather International

07/04/2016

Interview to Gabriella Marchioni Bocca , president of ASSOMAC , about SIMAC TANNING TECH 2016 - first impressions
Intervista a Gabriella Marchioni Bocca, presidente Assomac, sulle prime impressioni sul Simac Tanning Tech 2016.

thumb-1

Tratto da

26/02/2016

A Milano la fiera del settore.....
Scarpe, macchine in crescita nella UE...

thumb-1

Tratto da MF...

04/02/2016

Intervista a Gabriella Marchioni Bocca: "Asia, L'India è il nuovo bacino Produttivo"

thumb-1

Tratto da Trend in Tannery..

22/01/2016

Intervista a Gabriella Marchioni Bocca, presidente Assomac, "Condivisione e leadership tecnologica"

thumb-1

Tratto da il Giorno...

08/01/2016

Intervista a Gabriella Marchioni Bocca, Presidente Assomac, "Produzioni ed export in crescita. Le macchine per scarpe decollano"

thumb-1

a nice story.. / una bella storia /une belle histoire

30/11/2015

thumb-1

2° World Leather Congress

29/09/2015

Lamebo attended to the most important event for Tannery Industry.More than 300 delegates from all parts of world

thumb-1

2° WORLD LEATHER CONGRESS

29/09/2015

La Lamebo era presente ad uno degli eventi più importanti del settore, il 2° World Leather Congress! Il congresso ha visto la partecipazione di circa 300 delegati (clienti, concerie, fornitori, stampa, istituzioni pubbliche) provenienti da 28 Paesi.
Ecco il link dove poter vedere gli atti del convegno.
http://www.worldleathercongress2015.com/index.php/videos-docs

thumb-1

Tratto da Masters ..

11/09/2015

Elezione di Gabriella Marchioni Bocca, nuovo presidente di Assomac.

thumb-1

Tratto da Arsutoria..

11/09/2015

Intervista a Gabriella Marchioni Bocca, nuovo Presidente di Assomac: "Facciamo gioco di squadra" .

thumb-1

Tratto da L'infomatore Shoes

11/09/2015

Gabriella Marchioni Bocca nuovo Presidente di Assomac. La grande sfida di Simac Tanning Tech

thumb-1

Las mujeres

01/09/2015

Las mujeres "coparon" el Sector

About the election of Mrs. Gabriella Marchioni Bocca, Lamebo as Assomac President and Mrs. Annarita Pilotti as Assocalzaturifici President.

thumb-1

Tratto da ILM...

03/07/2015

Assomac new president

thumb-1

da FashionMag.com

02/07/2015

Assomac ha un nuovo presidente

Venerdì 26.06.2015 Gabriella Marchioni Bocca è stata eletta Presidente dell'associazione di settore Assomac.

thumb-1

Tratto da L'Informatore vigevanese..

02/07/2015

Il nuovo presidente Assomac

thumb-1

Gabriella Marchioni Bocca, Presidente di Assomac

01/07/2015

Venerdì 26.06.2015 Gabriella Marchioni Bocca è stata eletta Presidente dell'associazione di settore Assomac.

thumb-1

Tratto da Leather Insiders..

30/06/2015

Assomac
Gabriella Marchioni Bocca è stata eletta Presidente dell'associazione di settore Assomac.

thumb-1

Tratto da MF "Vola l'Export di Settore"

30/06/2015

Gabriella Marchioni Bocca nominata nuovo Presidente Assomac

thumb-1

Tratto da Mdp La Conceria ..

29/06/2015

Venerdì 26.06.2015 Gabriella Marchioni Bocca è stata eletta Presidente dell'associazione di settore Assomac.

thumb-1

Tratto da La Provincia Pavese

27/06/2015

thumb-1

E' successo un po' di anni fa....

04/05/2015

Intervista per Tecnologie Conciarie dopo il trasferimento nella nuova sede Lamebo
"Qualità e servizio alla base di una costante evoluzione"

thumb-1

Leather Insider Newsletter

28/02/2015

Leather Insider Newsletter
gruppo Split parliamo di :
tecnologia , innovazione ASSOMAC , novità LAMEBO

thumb-1

Dazi all'import ....

07/02/2015

e incentivi agli investimenti per l'India di Modi

sole 24 ore

thumb-1

Revamped Simac Tanning-Tech.....

03/02/2015

....ready for Milan return Simac Tanning Tech-2015,
innovation machines presentation

thumb-1

ARS TANNERY

05/01/2015

Export of Leather-Footwear machines takes off again. / Riparte l'export della meccanica Pelle-Calzature

thumb-1

New Image

23/12/2014

Trend Tannery

thumb-1

Lamebo rinnova l'immagine

23/12/2014

Trend Tannery

thumb-1

Parliamo di ......

27/02/2014

Moda Pelle

thumb-1

La Stampa

16/09/2013

pagina dell' UI
box eccellenze torinesi ....

thumb-1

Foto Shoe

01/10/2012

Foto Shoe - nasce Lamebo Silver

thumb-1

Foto Shoe

01/10/2010

Foto Shoe

thumb-1

Innovazione-quale-e-perchè?

04/07/2008

Innovazione quale e perché .... sempre più necessario essere competitivi , efficienti e produttivi
alcuni produttori di macchine per la conceria spiegano le innovazioni tecnologiche

thumb-1

Qualità e servizio ....

10/04/2008

Tecnologie Conciarie

Online payment

Fornisco il mio consenso al trattamento dei dati personali.

SI NO

Leggi qui l'informativa Privacy completa

Contacts

LAMEBO s.r.l.
Viale Kennedy 10040 Leinì (To) ITALY

P. IVA 00910710011

Fully paid up share capital Euro 95.000 – REA (Economic Administrative Index) nr. 415080 of the C.C.I.A.A. (Chamber of Commerce, Industry, Crafts and Agriculture) in Turin Company tax registry office for Turin nr.180/69 Company Register

Tel.: +39 011 9910383 | Telefax: +39 011 9910424

Skype: Lamebo | Email: lamebo@lamebo.it

PRIVACY POLICY

Information requests

For more information download a form and send it by fax or e-mail

  • Italiano
  • English
  • Français
  • Deutsch
  • Português
  • Español
  • Polacco
  • الْعَرَبيّة
  • 漢語
Logo Assomac
Menu